Repairing a Sentra after a collision means weighing the cost against what the car is worth, so we keep Sentra airbags and belt assemblies recovered from specific compacts, inspected and tested, and listed with real photos and prices. Belt colors and buckle plugs on this car vary by trim and interior, so send your VIN and we will confirm the right one before it ships. We also accept the original air bag diagnosis sensor unit by mail to clear the stored crash data, and we rebuild belts that deployed.
Nissan calls the Sentra airbag computer the air bag diagnosis sensor unit. It is the control unit for the supplemental restraint system. It receives signals from the crash-zone sensor in front of the radiator and the side satellite sensors on the pillars, decides how the airbags and pretensioners should deploy based on the type and severity of the collision, and writes a permanent deployment record into its memory.
Once that crash data is stored, the unit locks and the airbag light stays on. A standard OBD2 scanner cannot clear it because the hard codes live inside the sensor unit. Whether your Sentra deployed one airbag or several, the unit has the crash on file and will not arm again until the data is cleared at the module level.
We reset your original Sentra air bag diagnosis sensor unit in our shop, erase the stored crash data and hard codes, and return it factory-ready to plug back in. You keep the part Nissan built for your Sentra. It holds its original VIN-matched coding and arms again the moment it is reinstalled.
The Sentra has run for decades, and across its generations the diagnosis sensor unit settled under the center console on the floor. We reset every one from 1996 forward.
| Generation | Years | Module location |
|---|---|---|
| B14 | 1996 to 1999 | Under the center console on the floor between the front seats |
| B15 | 2000 to 2006 | Under the center console assembly on the floor tunnel |
| B16 | 2007 to 2012 | Under the center console on the floor, behind the console trim |
| B17 | 2013 to 2019 | Under the center console assembly between the front seats |
| B18 | 2020 to present | Low and centered under the console on the floor |
On a Sentra you remove the center console trim and the surrounding panels to reach the unit, then unbolt it from the floor. Turn the ignition off, disconnect both battery cables, and wait at least three minutes before you touch any of the yellow SRS connectors, because the airbags and pretensioners can still deploy for about three minutes after the power comes off. Call us if yours is hard to find on your year.
Nissan uses B-series SRS codes on the Sentra. Deployment and crash-data codes clear with a reset. Open and short codes can point to the spiral cable or a sensor. Scan yours first.
We do two repairs for the Sentra. We reset the original air bag diagnosis sensor unit and clear the stored crash data so the airbag light goes out. We also rebuild the Sentra seat belts, because after a deployment the pretensioners fire, lock, and the webbing can seize. We restore single, dual, and triple-stage Sentra belts and free locked retractors so they hold the way Nissan built them to.
We are honest about the limits. A module reset clears stored crash data. It is an electronics repair, so your Sentra has to be mechanically safe and properly repaired before the system goes back in service. If a code points to the spiral cable or a damaged sensor rather than stored data, we tell you.

A Sentra is usually a commuter on a budget, which is exactly who a reset serves best. Your B17 or B18 diagnosis sensor unit comes back cleared and ready to bolt in for a fraction of dealer price. We have handled Nissan SRS work since the late nineties, and we answer when you call.
Same air bag diagnosis sensor unit, same two repairs. Here are a few more Nissans we work on every week.
Mail us your original air bag diagnosis sensor unit or seat belt. We clear the crash data, rebuild the pretensioner, and ship your factory part back ready to install.
Genuine OEM, tested, and shipped ground from Jacksonville, Arkansas.
Nissan parts and codes · Do not see it listed? Request a part or call 501-988-0611.