B1100 flags a fault inside the center airbag sensor assembly, which is the SRS control module on Toyota and Lexus vehicles. It is most often a hardware or wiring issue that the repair has to trace at the module or its circuits.
On Toyota and Lexus, the airbag control module is called the center airbag sensor assembly. It is the brain of the SRS system, mounted near the center of the car. B1100 is set when the system detects a malfunction in that assembly or in the circuits feeding it. In plain terms, the module is reporting a problem with itself or with its wiring and ground connections.
B1100 is a live diagnostic fault. It is the system flagging an internal or circuit problem that keeps it from confirming it is ready to protect you, which is what separates it from a deployment code that simply records a past crash.
B1100 leans hardware. It points to the sensor assembly or its circuits. The usual path is checking the wiring, grounds, and connectors first, then the module itself if the wiring is clean. It is worth confirming the exact subcode and definition for your specific Toyota or Lexus, since the trailing digits narrow down where the fault sits.
Not on its own. A reset addresses stored crash data, and B1100 is generally an internal or circuit fault the repair has to trace at the assembly. If the wiring and grounds check out and the module itself has failed after a crash, our airbag module reset may apply where there is also crash data to clear. We read the full code set with you first and only take a module that genuinely needs the work.
B1100 is most associated with Toyota and Lexus, where the module carries the center airbag sensor assembly name. Similar B1100 definitions tied to SRS module or sensor faults appear on some other imports as well.
Start with the basics: inspect the wiring, connectors, and grounds at the module, and confirm the battery and charging system are healthy. If the assembly has failed and there is also crash data from a collision, make sure the car is mechanically safe, then mail us the module. A reset clears stored data; the physical repairs are a separate step that comes first. Related codes worth checking: B0078 (right front impact sensor), B1318 (battery voltage low), and B0053 (deployment commanded).
Mail us your original module. We restore it to factory-ready condition for a fraction of dealer cost, the same way we have since 1997.
Genuine OEM, tested, and shipped ground from Jacksonville, Arkansas.
Do not see it listed? Request a part or call 501-988-0611.