B0022 points to a side airbag deployment control circuit. The exact loop it names changes by manufacturer, so the first step is matching the code to your specific make.
B0022 is a deployment control code on a side restraint circuit. It tells you the module saw a problem on a side airbag or curtain loop, or that the loop fired in a crash. Where it gets tricky is which loop the code points to, because that depends on the make.
On some GM vehicles B0022 reads as a right front side or curtain deployment loop. On others it has been documented as the left curtain control or a driver front loop resistance issue. Because the meaning is not identical across every platform, do not assume the side or the part from the code number alone. Read it against the vehicle's service data and crash history.
[VERIFY] B0022 is interpreted differently across GM platforms (right front side, left curtain, and driver front loop have all been documented). Confirm the exact loop against the factory service manual for your specific year and model before deciding on a repair.
Both are possible with B0022, so the car's history decides it. If a side airbag or curtain actually deployed, B0022 is stored crash data and our reset clears it. If nothing deployed and the code appeared on its own, it leans toward a circuit, connector, or sensor fault that has to be repaired before the light will stay off. Because this code varies by make, we read the full code set with you and confirm the loop before quoting the job.
Yes, when B0022 is stored crash data from a side deployment. Our airbag module reset clears the deployment record and hard codes and returns your original module to factory-ready condition. If B0022 turns out to be a live circuit or sensor fault, that loop is the repair, and we will tell you that straight.
B0022 turns up most on GM vehicles, including Chevrolet, GMC, Buick, and Cadillac, and on other makes that follow the generic body code range. The side restraint meaning is consistent in spirit, while the exact loop differs by platform, so confirm it for your vehicle.
First, make sure the car is mechanically safe and any deployed side airbag or curtain has been replaced with a proper one. A reset clears stored data; the physical repairs are a separate step that comes first. Then mail us your module. We clear the crash data and send it back ready to install. Related codes worth checking: B0028 (right side deployment loop), B0078 (right front impact sensor), and B0053 (deployment commanded).
Mail us your original module. We restore it to factory-ready condition for a fraction of dealer cost, the same way we have since 1997.
Genuine OEM, tested, and shipped ground from Jacksonville, Arkansas.
Do not see it listed? Request a part or call 501-988-0611.